47
Before Concluding that this product is broken down.
Cause
The HyperHyde is not in the voice memo mode.
Remedy
Press the [Play] button a long time, then make sure the main lamp
and Record lamp are off (stopped). Then press the [Volume –]
button several times until the main lamp lights up orange. This is the
voice memo mode. If the [Record] button is pressed, recording will
start (however, it will start after about 2 seconds).
See p. 36, Recording a Voice Memo.
Cause
There are no voice memos recorded on the card.
Remedy
Make sure the card that is set is the correct card. You can understand
which voice memos have been recorded on the card by connecting to
the personal computer.
See p. 40, Using Voice Memos on Your Personal Computer.
Cause
−
Remedy
There is a groove in the corner of the card, so hook your fingernail in
the groove and pull the card out.
See p. 10, Removing Cards.
Cause
There is no space for the card.
Remedy
Check the available space on the card.
See p. 27, Check the card's available space.
Either delete the contents of the card, and purchase a new card.
Furthermore, if the card runs out of available space during recording,
the voice recorded up to that point is saved automatically.
Trouble Q & A
The card will not come out.
The main lamp went off during recording of a voice memo.
