24
Let’s listen to music.
Before copying data, make sure the follow
preparations have been made.
• A card should be inserted in the HyperHyde.
• The battery’s remaining charge should be
sufficient.
• The parallel cable should be connected
between the personal computer and the
HyperHyde.
• MP3 files should be saved on the hard disk.
1. If the battery level is too low, it may not be possible to transfer data correctly.
When transferring data, be sure to use a new battery.
2. Even in cases where files are created from a music CD, and even if the files have
been acquired from the Internet, make sure that the source where the MP3 files
are stored (copy source) is the hard disk.
Press the Play button. Make sure the main lamp
goes on.
Insert the parallel cable connector fully with
the
▲
mark on top.
C o n n e c t t h e p a r a l l e l c a b l e .
Recording to the HyperHyde
Copy MP3 data to the HyperHyde.
②
Check if it lights up.
▲
Mark
C h e c k
①
Press
C a u t i o n !
!
