46
Before Concluding that this product is broken down.
Cause
A card is not set.
Remedy
If no card is set, the Play button, etc. cannot be operated at all.
Please set a card in the player.
See p. 9, Inserting a Card.
Cause
The HyperHyde is not in the voice memo mode.
Remedy
Press the [Play] button a long time, then make sure the main lamp
and Record lamp are off (stopped). Then press the [Volume –]
button several times until the main lamp lights up orange. This is the
voice memo mode. If the [Record] button is pressed, recording will
start (however, it will start after about 2 seconds).
See p. 36, Recording a Voice Memo.
Cause
There is not sufficient space available in the card.
Remedy
Check if the card that is set is the correct card or not. The cards
available space can be understood by connecting the HyperHyde to
the personal computer.
Furthermore, if no music or voice memo is recorded on the card,
approximately 2 hours of voice memos can be recorded in a 32 Mbyte
card.
See p. 27, Check the card's available space.
Cause
The volume is too low.
Remedy
Press the [] button and raise the volume.
See p. 39, Operation during playback.
Cause
A card is not set.
Remedy
If no card is set, the Play button, etc. cannot be operated at all.
Please set a card in the player.
See p. 9, Inserting a Card.
Voice Memos cannot be recorded.
Voice Memos cannot be played.
Trouble Q & A
