45
Before Concluding that this product is broken down.
Cause
The volume is too low.
Remedy
Press the [] button and raise the volume.
See p. 30, Operation during playing music.
Cause
A card is not set.
Remedy
If no card is set, the Play button, etc. cannot be operated at all.
Please set a card in the player.
See p. 9, Inserting a Card.
Cause
The card has no songs on it.
Remedy
Make sure the card is inserted correctly. You can understand which
songs have been saved on the card by connecting to the personal
computer.
See p. 23, Recording to the HyperHyde.
Cause
The HyperHyde is not in the music mode.
Remedy
If the main lamp is lighted up, press the [Play] button for a long time,
then check if the main lamp and Record lamp are off (stopped). After
that, press the [Volume –] button several times until the main lamp
lights up green. This is the music mode. Music will be played if the
[Play] button is pressed.
See p. 29, Listening to Music on the HyperHyde.
Cause
The [Play] button has not been pressed from the stop state.
Remedy
Press the [Play] button a long time, then make sure the main lamp
and Record lamp are off (stopped). Then press the [Play] button to
play music.
See p. 29, Listening to Music on the HyperHyde.
Cause
The parallel cable is still connected.
Remedy
Disconnect the parallel cable from the HyperHyde.
See p. 23, Recording to the HyperHyde.
The music doesn’t play.
Trouble Q & A
