Hyundai ELANTRA 2016 Owner'S Manual Download Page 522

Page: 522 / 669

IF THE ENGINE WILL NOT START

If the engine doesn't turn over
or turns over slowly

• Be sure the shift lever is in N

(Neutral) or P (Park) if it is an auto-
matic transaxle vehicle. The engine
starts only when the shift lever is in
N (Neutral) or P (Park).

• Check the battery connections to

be sure they are clean and tight.

• Turn on the interior light. If the light

dims or goes out when you operate
the starter, the battery is drained.

Do not push or pull the vehicle to
start it. This could cause damage to
your vehicle. See instructions for
"Jump Starting" provided in this
chapter.

If the engine turns over nor-
mally but doesn’t start

• Check the fuel level and add fuel if

necessary.

If the engine still does not start, call
an authorized HYUNDAI dealer for
assistance.

What to do in an emergency

WARNING

Push or pull starting the vehicle
may cause the catalytic con-
verter to overload which can
lead to damage to the emission
control system.

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands

Hyundai ELANTRA 2016, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands