manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 615 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 615

Maintenance

66

7

Engine compartment panel
fuse replacement    

1. Turn the engine off.
2. Turn all other switches OFF.
3. Remove the fuse panel cover by

pressing the tap and pulling up.

4. Remove and check the suspected

fuse; replace it if it is blown. To
remove or insert the fuse, use the
fuse puller in the engine compart-
ment fuse panel.

5. Push in a new fuse of the same

rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized HYUNDAI dealer.

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery

cable.

3. Remove the fuse panel cover by

pressing the tap and pulling it up.

4. Remove the nuts shown in the pic-

ture above.

5. Replace the fuse with a new one

of the same rating.

6. Reinstall in the reverse order of

removal.

✽

✽

NOTICE

If the main fuse is blown, consult an
authorized HYUNDAI dealer. 

OMD070020

OMD070021

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments