Hyundai ELANTRA 2016 Owner'S Manual Download Page 30

Page: 30 / 669

Safety features of your vehicle

3 11

Lumbar support
(for driver’s seat, if equipped)

To adjust the lumbar support:
1. Press the front portion of the

switch to increase support or the
rear portion of the switch to
decrease support.

2. Release the switch once it reach-

es the desired position.

Seatback pocket

The seatback pocket is provided on
the back of the front seatbacks.

OMD030009

OMD030013

WARNING

To prevent the occupant classi-
fication system from malfunc-
tioning:

•

Do not place any items total
weighing over 2.2 lbs (1 kg) in
the seatback pocket on the
passenger’s seat.

•

Do not hang onto the front
passenger’s seatback.

WARNING

Do not put heavy or sharp
objects in the seatback pockets.
In an accident they could come
loose from the pocket and
injure occupants.

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands

Hyundai ELANTRA 2016, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands