Hyundai ELANTRA 2016 Owner'S Manual Download Page 478

Page: 478 / 669

5 21

Driving your vehicle

WARNING

To reduce the risk of SERIOUS
INJURY or DEATH:
• ALWAYS wear your seatbelt.

In a collision, an unbelted
occupant is significantly more
likely to be seriously injured
or killed than a properly belt-
ed occupant.

• Avoid high speeds when cor-

nering or turning.

• Do not make quick steering

wheel movements, such as
sharp lane changes or fast,
sharp turns.

• The risk of rollover is greatly

increased if you lose control
of your vehicle at highway
speeds.

• Loss of control often occurs if

two or more wheels drop off
the roadway and the driver
over steers to reenter the
roadway.

(Continued)

(Continued)
• In the event your vehicle

leaves the roadway, do not
steer sharply. Instead, slow
down before pulling back into
the travel lanes.

• HYUNDAI recommends you

follow all posted speed limits.

UD(FL) HMA 5.qxp 6/26/2014 3:22 PM Page 21

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands

Hyundai ELANTRA 2016, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands