manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 627 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 627

Maintenance

78

7

1. Open the hood.
2. Disconnect the negative battery

cable.

3. Loosen the screws with a screw-

driver.

4. Pull the headlight assembly out to

the front of the vehicle.

5. Disconnect the power connec-

tor(s) from the back of the head-
light assembly.

Headlight bulb (low, high)

6. Remove the headlight bulb cover

by turning it counterclockwise.

7. Disconnect the headlight bulb

socket-connector.

8. Unsnap the headlight bulb retain-

ing wire by depressing the end
and pushing it upward.

9. Remove the bulb from the head-

light assembly.

10. Install a new headlight bulb and

snap the headlight bulb retaining
wire into position by aligning the
wire with the groove on the bulb.

11. Connect the headlight bulb sock-

et-connector.

12. Install the headlight bulb cover by

turning it clockwise.

OMD074028

Low

High

OMD074027

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments