manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 495 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 495

Driving your vehicle

38

5

Vehicle Stability Management
(if equipped)  

Vehicle Stability Management (VSM)
helps ensure the vehicle stays stable
when accelerating or braking sud-
denly on wet, slippery and rough
roads where traction over the four
tires can suddenly become uneven.

VSM operation

VSM ON condition

The VSM operates when:
• The Electronic Stability Control

(ESC) is on.

• Vehicle speed is approximately

above 9mph (15 km/h) on curve
roads.

• Vehicle speed is approximately

above 18 mph (30 km/h) when the
vehicle is braking on rough roads.

When operating 

When you apply your brakes under
conditions which may activate the
ESC, you may hear sounds from the
brakes, or feel a corresponding sen-
sation in the brake pedal. This is nor-
mal and it means your VSM is active.

✽

✽

NOTICE

The VSM does not operate when: 
• Driving on bank road such as gra-

dient or incline 

• Driving rearward.
• ESC OFF indicator light is on. 
• EPS (Electric Power Steering)

warning light (

) is on. 

WARNING

Take the following precautions
when using the Vehicle Stability
Management (VSM):
• ALWAYS check the speed and

the distance to the vehicle
ahead. The VSM is not a sub-
stitute for safe driving prac-
tices.

• Never drive too fast for the

road conditions. The VSM sys-
tem will not prevent acci-
dents. Excessive speed in bad
weather, slippery and uneven
roads can result in severe
accidents.

UD(FL) HMA 5.qxp  6/26/2014  3:22 PM  Page 38

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments