manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 457 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 457

4 371

Features of your vehicle

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operatedwith minmum 20cm between the and your body. This transmitter
must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so
by the FCC.

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments