manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 635 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 635

Maintenance

86

7

1. Using a flat-blade screwdriver,

gently pry the lens from the interi-
or lamp housing.

2. Remove the bulb by pulling it

straight out.

3. Install a new bulb in the socket.
4. Align the lens tabs with the interior

lamp housing notches and snap
the lens into place.

WARNING 

Use care not to dirty or damage
lenses, lens tabs, and plastic
housings.

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments