Hyundai ELANTRA 2016 Owner'S Manual Download Page 216

Page: 216 / 669

Features of your vehicle

130

(Continued)
• Some iPod

devices, such as the

iPhone

, can be connected

through the

Bluetooth

Wireless

Technology interface. The
device must have audio

Bluetooth

Wireless Technology

capability (such as for stereo
headphone

Bluetooth

Wireless

Technology).
The device can play, but it will
not be controlled by the audio
system.

• To use iPod

features within the

audio, use the cable provided
upon purchasing an iPod

device.

• Skipping or improper operation

may occur depending on the
characteristics of your iPod

iPhone

device.

• If your iPhone

is connected to

both the

Bluetooth

Wireless

Technology and USB, the sound
may not be properly played. In
your iPhone

, select the Dock

connector

Bluetooth

Wireless Technology to change
the sound output (source).

(Continued)

(Continued)
• When connecting iPod

with the

iPod

Power Cable, insert the

connector to the multimedia
socket completely. If not insert-
ed completely, communications
between iPod

and audio may

be interrupted.

• When adjusting the sound

effects of the iPod

and the

audio system, the sound effects
of both devices will overlap and
might reduce or distort the
quality of the sound.

• Deactivate (turn off) the equal-

izer function of an iPod

when

adjusting the audio system’s
volume, and turn off the equal-
izer of the audio system when
using the equalizer of an iPod

• When not using iPod

with car

audio, detach the iPod

cable

from iPod

. Otherwise, iPod

may remain in accessory mode,
and may not work properly.

✽

NOTICE

Bluetooth

Wireless Technology

• The

Bluetooth

word mark and

logos are registered trademarks
owned by Bluetooth SIG, lnc.
and any use of such marks is
under license.
A

Bluetooth

enabled call phone

is required to use

Bluetooth

wireless technology.

•

Bluetooth

Wirelss Technology

phone compatibility can be
checked by visiting www.
hyundaiusa.com and under the
SERVICE & PARTS - BLUE-
TOOTH COMPATIBILITY
menu.

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands

Hyundai ELANTRA 2016, Owner'S Manual

Search results

Summary of Contents for ELANTRA 2016

Reviews:

Related manuals for ELANTRA 2016

Brands by name

Popular brands