Hyundai ELANTRA 2016 Owner'S Manual Download Page 107

Page: 107 / 669

4 21

Features of your vehicle

Opening the trunk

1. Make sure the shift lever is in P

(Park, for automatic transaxle) or first
gear or R (Reverse, for manual
transaxle) and set the parking brake.

2. Perform one of the following:

- Press the remote key or smart

key Trunk Unlock button for more
than one second.

- Press the button on the trunk

itself with the smart key in your
possession.

- Press the button on the trunk

itself when all doors are unlocked.

- Use the mechanical key.

- Use the trunk release lever.

Closing the trunk

Lower the trunk lid and press down
until it locks. To be sure the trunk lid
is securely fastened, always check
by trying to pull it up again.

✽

NOTICE

In cold and wet climates, trunk locks
and trunk mechanisms may not
work properly due to freezing condi-
tions.

TRUNK

OMD040013A

■

Outside

WARNING

Make sure there are no people
or objects around the trunk
before opening or closing the
trunk.

OMD040014

■

Inside

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2016

Reviews:

Hyundai ELANTRA 2016, Owner'S Manual, Page: 107 / 669

Search results

Summary of Contents for ELANTRA 2016

Reviews: