manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 171 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 171

4 85

Features of your vehicle

Heating and air conditioning

1. Start the engine.
2. Set the mode to the desired position.

To improve the effectiveness of

heating and cooling :
- Heating:
- Cooling:

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air or recirculated
air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system (if
equipped) on.

OMD044102

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments