manualshive.com logo in svg

Hyundai ELANTRA 2016, Owner'S Manual, Page: 527 / 669

Share
Download
Hyundai ELANTRA 2016 Owner'S Manual Download Page 527

6.If you cannot find the cause of the

overheating, wait until the engine
temperature has returned to nor-
mal. Then, if coolant has been lost,
carefully add coolant to the reser-
voir to bring the fluid level in the
reservoir up to the halfway mark.

7.Proceed with caution, keeping

alert for further signs of overheat-
ing. If overheating happens again,
call an authorized HYUNDAI deal-
er for assistance.

6 9

What to do in an emergency

CAUTION

• Serious loss of coolant indi-

cates a leak in the cooling
system and have the system
checked by an authorized
HYUNDAI dealer.

• When the engine overheats

from low engine coolant, sud-
denly adding engine coolant
may cause cracks in the
engine. To prevent damage,
add engine coolant slowly in
small quantities.

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments