Hyundai ELANTRA 2016 Owner'S Manual Download Page 36

Page: 36 / 669

Safety features of your vehicle

3 17

To reinstall the headrest :
1. Put the headrest poles (2) into the

holes while pressing the release
button (1).

2. Recline the seatback (4) with the

recline lever or switch (3).

3. Adjust the headrest to the appro-

priate height.

WARNING

NEVER allow anyone to ride in a
seat with the headrest removed.

WARNING

Always make sure the headrest
locks into position after rein-
stalling and adjusting it properly.

OMD034063

OMD034012

■

Type A

■

Type B

Summary of Contents for ELANTRA 2016






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ELANTRA 2016

Reviews:

Hyundai ELANTRA 2016, Owner'S Manual, Page: 36 / 669

Search results

Summary of Contents for ELANTRA 2016

Reviews: