![background image](http://html1.mh-extra.com/html/hyundai/ds-8000-hfi-st-series/ds-8000-hfi-st-series_user-manual_2196304067.webp)
User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
66
5.3
Configuring Motion Detection Record and
Capture
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes
place, the device can analyze it and do many actions to handle it. Enabling motion detection function can trigger
certain channels to start recording/capture, or trigger full screen monitoring, audible warning, notify the
surveillance center and so on. In this chapter, you can follow the steps to schedule a record which triggered by the
detected motion.
Steps:
1.
Enter the Motion Detection interface.
Menu>Camera>Motion
Figure 5. 17
Motion Detection
2.
Configure Motion Detection:
1)
Choose camera you want to configure.
2)
Check
checkbox to enable motion detection.
3)
Drag and draw the area for motion detection by mouse. If you want to set the motion detection for
all the area shot by the camera, click
. To clear the motion detection area, click
.