Hyundai DS-8000 HFI-ST Series User Manual Download Page 32

Page: 32 / 240

User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR

2.2

Adding and Connecting the IP Cameras

Note:

This Chapter is available for DS-9000/8000HFI-ST & DS-9000HFI-RT/XT & 9000HWI-ST series only.

2.2.1

Adding the IP Cameras

Purpose:

Hybrid DVR (DS-9000/8000HFI-ST & DS-9000HFI-RT/XT & 9000HWI-ST series) can connect the network

cameras and record the video got from it. So before you can get a live view or record of the video, you should add

the network cameras to the connection list of the device.

Before you start:

Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please

see

Chapter

9.1 Configuring General Settings, Chapter 9.3 Checking Network Traffic

and

Chapter 9.4 Network

Detection.

Steps:

Enter the Camera Management interface.

Menu> Camera> Camera

Figure 2. 12

Main Menu

Note:

In Analog Camera Management interface, the status of analog cameras display. Disabling the analog

camera can be realized by clearing the checkbox before the analog camera No.. One more network camera

can be added by disabling one analog camera. 16 /8 /4 network cameras can be added to DS-9016&8016

HFI-ST&9016HFI-RT&9016HFI-XT&9016HWI-ST/9008&8008

HFI-ST&9008HFI-RT&9008HWI-ST/9004&8004HFI-ST&DS-9004HFI-RT&9004HWI-ST series at most

when all the analog cameras are enabled. 32 /16 /8 network cameras can be added to DS-9016&8016

HFI-ST&9016HFI-RT&9016HFI-XT&9016HWI-ST/9008&8008

HFI-ST&9008HFI-RT&9008HWI-ST/9004&8004HFI-ST&DS-9004HFI-RT&9004HWI-ST series at most

when all the analog cameras are disabled.

Summary of Contents for DS-8000 HFI-ST Series

















































































































































































































































Search results

Summary of Contents for DS-8000 HFI-ST Series

Reviews:

Brands by name

Popular brands

Hyundai DS-8000 HFI-ST Series, User Manual

Search results

Summary of Contents for DS-8000 HFI-ST Series

Reviews:

Brands by name

Popular brands