User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
183
Note:
In this chapter, we use the interface of DS-9100HFI-ST series (unless stated) as example to describe the
following settings.
11.1
Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your device.
Note:
If there is uninitialized HDD existed in the device, the following message box pops up when the device
starts up.
Figure 11. 1
Message Box of Uninitialized HDD
Click
to initialize it immediately or you can perform the following steps to initialize the HDD(s).
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General
Figure 11. 2
HDD Information Interface
