User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
143
9.2
Configuring Advanced Settings
Note:
We use the interface of DS-9100HFI-ST series (unless stated) as example to describe the following settings.
9.2.1
Configuring PPPoE Settings
Purpose:
Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the
Network Settings
interface.
Menu > Configuration > Network
2.
Select the
PPPoE
tab to enter the PPPoE Settings interface.
Figure 9. 3
PPPoE Settings Interface
3.
Check
checkbox to enable PPPoE.
4.
Enter
User Name
,
Password
, and
Confirm Password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
Figure 9. 4
PPPoE Settings Interface
5.
Click
to save and exit the interface.
6.
After successful settings, the system asks you to reboot the device to activate the new settings, and the
PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of PPPoE
connection. Please refer to
Chapter 13.1.5Viewing Network Information
for PPPoE status.
9.2.2
Configuring DDNS Settings
Purpose:
If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be
used for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1.
Enter the Network Settings interface.
