User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
22
1.6
Starting Up and Shutting Down the Device
Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Before you start:
Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground
connection is working properly.
Starting up the device:
Steps:
1.
Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2.
Turn on the Power Switch on the rear panel and press the
POWER
button on the front panel. The Power
indicator LED should turn blue indicating that the device begins to start up.
3.
After startup, the Power indicator LED is solid blue. A splash screen with the status of the HDD appears on
the monitor. The row of icons at the bottom of the screen shows the HDD status. ‘X’ means that the HDD is
not installed or cannot be detected.
Shutting down the device:
Steps:
There are two proper ways to shut down the device. To shut down the device:
• OPTION 1: Standard shutdown
1.
Enter the Shutdown menu.
Menu > Shutdown
Figure 1. 5
Shutdown Menu
2.
Click the
Shutdown
button.
3.
Click the
Yes
button.
• OPTION 2: By operating the front panel
1.
Press and hold the POWER button on the front panel for 3 seconds.
2.
Enter the administrator’s username and password in the dialog box for authentication.
3.
Click the
Yes
button.
Notes: