User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
49
4.1
Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Before you start:
Check that the PTZ and the device are connected properly through RS-485 interface.
Steps:
1.
Enter the PTZ Settings interface.
Menu >Camera> PTZ
Figure 4. 1
PTZ- General
2.
Choose the camera for PTZ setting in the
Camera
dropdown list.
3.
Enter the parameters of the PTZ camera.
Note:
All the parameters should be exactly the same as the PTZ camera parameters. Only PTZ Protocol can be
configured for network cameras.
Example:
If the PTZ camera has a Baud rate as 115200, you should input 115200 in the Baud Rate field.
4.
Click
if you want to configure same settings to other analog PTZ cameras.
5.
Click
to save the settings.
