User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
60
Figure 5. 5
Copy Camera Settings
3.
Encoding Parameters for Sub-stream
1)
Select
Substream
tab to set the parameters of sub-stream. Configure the stream type, resolution, frame
rate, etc.
Figure 5. 6
Sub-stream Encoding
2)
Click
to save the settings.
3)
You can click
to copy the settings to other analog channels, if the setting can also be used for
other channels.
4.
Encoding Parameters for Capture
1)
Select the
Capture
tab.
Figure 5. 7
Capture Encoding
2)
You can configure the normal and event parameters separately.
3)
Click
to save the settings.
4)
If the parameters can also be used to other analog channels, click
to copy the settings to
other channels.
Note:
The interval is the time period between two capturing actions and the interval can be set as 1s, 2s, 3s,
4s, 5s, 10min, 30min, 1h, 12h and 24h. You can configure all the parameters on this menu on your demand.
5.
Configure the overwrite mode of the HDD (Menu>Record>Advanced). Check
checkbox to enable the
