User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
35
Note:
Before customizing the protocol for the network camera, you have to contact the manufacturer of the
network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream.
Example:
The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g.,
rtsp://192.168.1.55:554/ch1/main/av_stream.
Protocol Name:
Edit the name for the custom protocol.
Enable Substream:
If the network camera does not support sub-stream or the sub-stream is not needed,
leave the checkbox empty.
Type:
The network camera adopting custom protocol must support getting stream through standard RTSP.
Transfer Protocol:
Select the transfer protocol for the custom protocol.
Port:
Set the port No. for the custom protocol.
Path:
Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
3.
Click
to save the settings and click
to finish customizing the protocol.
4.
After successfully adding the custom protocols, you can see the protocol name listed in the dropdown list,
see the below figure.
Figure 2. 19
Configure Custom Protocol
5.
Select the custom protocol and enter the IP address, user name and password of the camera.
6.
Click
to add the network camera.
