User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
126
8.1
Setting Motion Detection
Note:
We use the interface of DS-9100HFI-ST series (unless stated) as example to describe the following settings.
Steps:
1.
Enter Motion Detection interface and choose a camera you want to set motion detection.
Menu> Camera> Motion
Figure 8. 1
Motion Detection Settings Interface
2.
Set detection area and sensitivity.
Check
checkbox to enable motion detection, use the mouse to draw detection area(s) and drag the
sensitivity bar to set sensitivity.
Click
to set alarm response actions.
Figure 8. 2
Set Detection Area and Sensitivity
3.
Click
Trigger Channel
tab and select one or more channels which will start to record/capture or become
full-screen monitoring when motion alarm is triggered. Click
to save the settings.
