Hyundai 2006 Santa Fe Owner'S Manual Download Page 84

Page: 84 / 281

FEATURES OF YOUR HYUNDAI

GLOVE BOX

B500A01S-AAT

WARNING:

To avoid the possibility of injury in case of
an accident or a sudden stop, the glove box
door should be kept closed when the car is
in motion.

B500A01O

UNLOCK

LOCK

o ON

In the "ON" position, the light stays on at all
times.

CAUTION

Do not leave this button pressed for an
extended period of time when the vehicle is
not running.

o OFF

In the "OFF" position, the light stays off at all
times even though a door is open.

o To open the glove box, pull on the glove box

release lever.

o The glove box door can be locked (and

unlocked) with the key.

SUNGLASS HOLDER

B491A03O-AAT

HSM2168

The sunglass holder is located on the front
overhead console. Push the end of the cover to
open the sunglass holder.

WARNING:

o Do not keep objects except sunglass

inside the sunglass holder. Such ob-
jects can be thrown from the holder in
the event of a sudden stop or an acci-
dent, possibly injuring the passengers
in the vehicle.

o Do not open the sunglass holder while

the vehicle is moving. The rear view
mirror of the vehicle can be blocked by
an open sunglass holder.

With Sunroof

Without Sunroof

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Search results

Summary of Contents for 2006 Santa Fe

Reviews:

Brands by name

Popular brands

Hyundai 2006 Santa Fe, Owner'S Manual

Search results

Summary of Contents for 2006 Santa Fe

Reviews:

Brands by name

Popular brands