manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 111

1

FEATURES OF YOUR HYUNDAI

99

o Set the temperature control to "Cool". ("Cool"

provides maximum cooling. The tempera-
ture may be moderated by moving the con-
trol toward "Warm".)

o Adjust the fan control to the desired speed.

For greater cooling, turn the fan control to
one of the higher speeds or temporarily
select the recirculate (        ) position on the
air intake control switch.

B740C02O-AAT

De-Humidified Heating

For dehumidified heating:

o Set the air flow control to the face (       ) position.
o Turn on the air conditioning switch. The air

conditioning indicator light should come on at
the same time.

o Set the air intake control switch to the fresh

air (       ) position.

o Adjust the fan control to the desired speed.
o For more rapid action, set the fan at one of

the higher speeds.

o Adjust the temperature control to provide the

desired amount of warmth.

B740C01O-1

To use the air conditioning to cool the interior:

o Set the air flow control to the face (       ) position.
o Turn on the air conditioning switch by push-

ing in on the switch. The air conditioning
indicator light should come on at the same
time.

o Set the air intake control switch to the fresh

air (       ) position.

B740B03O-AAT

Air Conditioning Operation
Cooling

B740B01O-1

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands