manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 82

1

FEATURES OF YOUR HYUNDAI

70

B460D01O-GAT

Manual Operation of Sunroof

If the sunroof does not electrically operate:

1. Open the sunglass case.

2. Turn the hexagonal bolts counterclockwise

to remove the overhead console with a
socket wrench.

B460D01O

B460D02O

B460C01O-AAT

Tilting the Sunroof

The sunroof is moved to its fully tilt up position
by pushing the "           " switch and to stop at the
desired position, push in any switches.
To tilt down, press and hold the "           " button.
Release the button when the sunroof reaches
the desired position.

NOTE:

After washing the car or after there is rain,
be sure to wipe off any water that is on the
sunroof before operating it.

HSM2023

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands