manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 31

1

FEATURES OF YOUR HYUNDAI

19

!

SEAT BELTS

B150B03Y-AAT

Infant or Small Child

All 50 states have child restraint laws. You
should be aware of the specific requirements in
your state. Child and/or infant safety seats must
be properly placed and installed in the rear seat.
Information about the use of these restraints
begins on page 1-26.

!

!

B140A01B-AAT

REAR SEAT WARNING

For the safety of all passengers, luggage or
other cargo should not be piled higher than the
top of the seatback.

B080P01O

B150A01S-AAT

SEAT BELT PRECAUTIONS

WARNING:

All occupants of the vehicle must wear their
seat belts at all times. Note that this vehicle
is equipped with a Supplemental Restraint
(Airbag) System as discussed beginning
on page 1-34. The seat belts must be used
in conjunction with the supplemental
airbag system. State laws require that some
or all occupants of the vehicle use seat
belts. The possibility of increased injury or
severity of injury in an accident will be
increased if this elementary safety precau-
tion is not observed. In addition, follow the
other instructions provided in this section.

o When you return the rear seatback to its

upright position after being folded down,
be careful not to damage the seatbelt
webbing or buckle. In addition, do not
allow the seatbelt webbing or buckle to
get caught or pinched in the rear seat.

o When you return the rear seatback to its

upright position, be sure it is locked into
position. Attempt to move it.

o Never attempt to fold or return seat while

the vehicle is moving.

WARNING:

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands