manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 101

1

FEATURES OF YOUR HYUNDAI

89

B660B04O-AAT

To Set the Cruise Speed

1. Push the cruise control ON/OFF switch.

The "CRUISE" indicator light in the instru-
ment cluster will illuminate. This turns the
system on.

2. Accelerate to desired cruising speed above

25 mph (40 km/h).

CRUISE CONTROL

B660A02S-AAT

(If installed)

The cruise control system provides automatic
speed control for your comfort when driving on
straight, open freeways, toll roads, or other
noncongested highways. This system is de-
signed to function above approximately 25 mph
(40 km/h).

NOTE:

Cruise control is not recommended for city
driving, winding roads, slippery roads,
heavy rain, or other bad weather condi-
tions.

B660A01O

3. Push the "SET" (COAST) switch after you

have set the vehicle speed at the desired
speed. The "SET" indicator light in the instru-
ment cluster will illuminate.

4. Remove your foot from the accelerator pedal

and the desired speed will automatically be
maintained.

B660B01O

5. To momently increase speed, temporarily

depress the accelerator pedal enough for
the vehicle to exceed the preset speed.
When you remove your foot from the accel-
erator pedal, the vehicle will return to the
speed you have set.

NOTE:

If the vehicle speed decreases more than 12
mph (20 km/h) below the set speed or
decreases below 25 mph (40 km/h), the
cruise control system will automatically
cancel the set speed.

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands