manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 166

2

DRIVING YOUR HYUNDAI

15

FULL TRACTION CONTROL SYS-
TEM (FTCS)

C310A01O-AAT

(If installed)

On slippery road surfaces, the traction control
system (TCS) limits the drive wheels from
spinning excessively, thus helping the car to
accelerate. It also helps to provide sufficient
driving force and steering performance as the
car turns.

HSM434

!

SLIP Control

Limits the drive wheels from spinning exces-
sively during starting or while making acceler-
ated turns on slippery roads to avoid losing the
driving force of the front wheels.

Driving Hints

TCS does not actively apply brakes. Be sure to
decelerate the car sufficiently before entering
curves.

CAUTION:

When the TCS indicator blinks, SLIP control
has been activated. It also means that the
road is slippery or your car is accelerating
excessively. In this situation, release foot
pressure from the accelerator pedal and
maintain moderate speed.

WARNING:

Traction control is only a driving aid; all
normal precautions for driving in inclement
weather and on slippery road surfaces
should be observed.

!

C310B02O-AAT

TCS ON/OFF Mode

When the TCS is operating, the TCS indicator
in the instrument cluster will blink.
If you turn the system off by pressing the TCS
switch, the TCS-OFF indicator will come on and
stay on. In the TCS-OFF mode, the SLIP control
will be deactivated. Adjust you driving accord-
ingly. To turn the system back on, press the
switch again. The TCS-OFF indicator should go
off.

NOTE:

1) The TCS mode will automatically be

turned ON after the engine is turned off
and restarted.

2) When the traction control system is op-

erating properly, you can feel a slight
pulsation in the vehicle. This is only the
effect of brake control and indicates
nothing unusual.

3) When the engine starts, a click may be

heard from the engine compartment;
this is the sound of the traction control
being checked.

4) When moving out of the mud or fresh

snow, pressing the accelerator pedal
may not cause the engine speed to in-
crease due to TCS operation.

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands