manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 26

1

FEATURES OF YOUR HYUNDAI

14

!

B080F01A-AAT

Seat Cushion Height Adjustment
(Driver's Seat Only)

To raise or lower the front part of the seat
cushion, turn the front knob forward or rear-
ward. To raise or lower the rear part of the seat
cushion, turn the rear knob forward or rear-
ward.

B080F01O

B090A01Y-AAT

POWER DRIVER'S SEAT (If installed)

The driver's seat can be adjusted appropriately
by using the control knobs on the left side of the
seat. Before driving, adjust the seat to the
proper position so  as to easily control the
steering wheel, pedals and switches on the
instrument panel.

CAUTION:

Do not operate two knobs at the same  time.

WARNING:

o Never attempt to adjust the seat while

the vehicle is moving. This could result
in loss of control or an accident causing
death, serious injury, or property dam-
age.

o Do not sit or lean unnecessarily close to

the airbag.

!

B080E02A-AAT

Lumbar Support Control
(Driver's seat only)

To adjust the lumbar support, turn the handle on
the inboard side of the seat. To increase the
amount of lumbar support, pull the lever for-
ward. To decrease it, push the lever toward the
rear.

1. Minimum support
2. Maximum support

B080E01O

1

2

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands