manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 231

6

DO-IT-YOURSELF MAINTENANCE

18

HSM443

5. Replace two climate control air filters by

pulling the knob of the air conditioner filter
outward.

6. Installation is the reverse order of disassem-

bly.

!

4. Turn the knob of the climate control air filter

cover counterclockwise and remove the
climate control air filter cover.

HSM444

CAUTION:

Be sure to install the climate control air filter
in the direction of the arrow sign. Other-
wise, it may cause noise or deterioration.

CHECKING THE FREE-PLAY

G150A01A-AAT

STEERING WHEEL

To check the steering wheel free-play, stop the
car with the wheels pointed straight ahead and
gently move the steering wheel back and forth.
Use very light finger pressure and be sensitive
to changes in resistance that mark the limits of
the free-play. If the free-play is greater than
specified, have it inspected by your Hyundai
dealer and adjusted or repaired if necessary.

G150A01O

1.18 in.
(30 mm)

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands