manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 177

2

DRIVING YOUR HYUNDAI

26

!

4. The gross combination weight (sum of

your vehicle weight plus its load and the
total trailer weight) must not exceed the
following.

4WD

-

7400(3357)

7700(3493)

Lbs. (kg)

2WD

6000(2721)

7700(3493)

8000(3629)

Combination Weight

Engine

2.4

2.7

3.5

WARNING:

o Improperly loading your vehicle and

trailer can seriously affect its steering
and braking performance causing a
crash which could cause serious injury
or death.

o Towing a trailer affected vehicle han-

dling and braking.

o Drive more slowly when towing a trailer

and allow more distance when braking.

o Be careful when driving in slippery and

windy conditions.

o Be careful when turning and while driv-

ing up and down hills.

o Do not exceed 45 mph or the posted

towing speed limit, whichever is lower.

2.4(2WD)

2.7(2WD)

2.7(4WD)

3.5(2WD)

3.5(4WD)

Tongue

170(77.1)

120(54.4)

320(145.2)

270(122.5)

270(122.5)

220(99.8)

350(158.8)

300(136.1)

300(136.1)

250(113.4)

100(45.3)

120(54.4)

120(54.4)

150(68.0)

Lbs. (kg)

Trailer

1700(771)

1200(544)

3200(1452)

2700(1225)

2700(1225)

2200(998)

3500(1588)

3000(1361)

3000(1361)

2500(1134)

1000(453)

1200(544)

1200(544)

1500(680)

Maximum Towable Weight

Type A

Type B

Type A

Type B

Type A

Type B

Type A

Type B

Type A

Type B

With

Brake

Without

Brake

Without

Brake

+ABS

Engine

2.4(2WD)

2.7(2WD)

2.7(4WD)

3.5(2WD)

3.5(4WD)

2.4(2WD)

2.7(2WD)

2.7(4WD)

3.5(2WD)

3.5(4WD)

Type A : Vehicle carrying 2 passengers
Type B : Vehicle carrying 5 passengers

NOTE:

1. Never load the trailer with more weight in

the back than in the front. About 60% of
the trailer load should be in the front half
on the trailer and the remaining 40% in
the rear.

2. The total gross vehicle weight with trailer

must not exceed the Gross Vehicle
Weight Rating (GVWR) shown on the
vehicle identification plate (see page 8-
2). The total gross vehicle weight is the
combined weight of the vehicle, driver,
all passengers and their luggage, cargo,
hitch, trailer tongue load and other op-
tional equipment.

3. The front or rear axle weight must not

exceed the Gross Axle Weight Rating
(GAWR) shown on the vehicle identifi-
cation plate (see page 8-2). It is possible
that your towing package does not ex-
ceed the GVWR but exceeds the GAWR.
Improper trailer loading and/or too much
luggage in the cargo area can overload
the rear axle. Redistribute the load and
check the axle weight again.

!

CAUTION:

The following specifications are recom-
mended when towing a trailer. The loaded
trailer weight cannot safely exceed the val-
ues in the chart.

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands