manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 52

1

FEATURES OF YOUR HYUNDAI

40

- Lean on on the center console.
- Sit on one side of the front passenger seat.

B990A07O

B990A05O

- Place feet on the dashboard.

o Excessively recline the front passenger

seatback.

o Sit with hips shifted towards the front of the

seat.

B990A03O

B990A02O

o Put a heavy load in the front passenger seat.

*2) Do not allow children to ride in the front

passenger seat. When a larger child who
has outgrown a child restraint system sits in
the front passenger seat, the system may
recognize him/her as an adult depending on
his/her physique or posture.

*3) Never install a child restraint system on the

front passenger seat.

In order that the system detects the condi-
tions correctly, do not do any of the follow-
ing.

B990A08O

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands