manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 112

1

FEATURES OF YOUR HYUNDAI

100

B730A01L-AAT

Operation Tips

o To keep dust or unpleasant fumes from

entering the car through the ventilation sys-
tem, temporarily set the air intake control
switch to the          position.
Be sure to return the control switch to
the               position when the irritation has
passed to keep fresh air in the vehicle. This
will help keep the driver alert and comfort-
able.

o Air for the heating/cooling system is drawn

in through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.

o To prevent interior fog on the windshield, set

the air intake control switch to the fresh air
(     ) position, fan speed to the desired
position, turn on the air conditioning system,
and adjust temperature control to desired
temperature.

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands