manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 188

3

WHAT TO DO IN AN EMERGENCY

5

SPARE TIRE

D040A01O-GAT

The following instructions for the FULL
SIZE spare tire should be observed:

Check inflation pressure as soon as
practical after installing the spare tire,
and adjust to the specified pressure.
The tire pressure should be periodically
checked and maintained at the speci-
fied pressure while the tire is stored.

Spare Tire Pressure

D040B02B-GAT

Handling the Spare Tire

Tire Size

Inflation Pressure

Full Size

30 psi (207 kPa)

To remove the spare tire

1. Open the tail gate.
2. Remove the mounting bolt cover with

a screw driver or coin.

D040B01O

3. Loosen the mounting bolt with a wheel

nut wrench.

D040B02O

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands