manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 2

A010A02A-AAT

WARRANTIES FOR YOUR HYUNDAI VEHICLE

o New Vehicle 60 Months/60,000 Miles Limited Warranty
o New Vehicle 120 Months/100,000 Miles Limited Powertrain Warranty (original owner only)
o Anti-Perforation Limited Warranty
o Emission Defect Warranty - Federal Vehicle
o California Emission Control System Warranty (if applicable)
o Emission Performance Warranty - Federal Vehicle
o Replacement Parts and Accessories Limited Warranty

NOTE:

Detailed warranty information is provided in your Hyundai Owner's Handbook.

A020A01A-AAT

RESPONSIBILITY FOR MAINTENANCE

The maintenance requirements for your new Hyundai are found in Section 5. As the owner, it is your responsibility
to see that all maintenance operations specified by the manufacturer are carried out at the appropriate intervals.
When the vehicle is used in severe driving conditions, more frequent maintenance is required for some operations.
Maintenance requirements for severe operating conditions are also included in Section 5.

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands