manualshive.com logo in svg

Hyundai 2006 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2006 Santa Fe Owner'S Manual Download Page 102

1

FEATURES OF YOUR HYUNDAI

90

B660F04O-AAT

To Reset at a Slower Speed

1. Push the "SET (COAST)" switch and hold it.

While the control switch is pushed, the "SET"
indicator light in the instrument cluster will
illuminate and the vehicle speed will gradu-
ally decrease.

2. When the desired speed is obtained, release

the control switch.
The "SET" indicator light in the instrument
cluster will go out.

B660B01O

B660D01O-AAT

To Resume the Preset Speed

The vehicle will automatically resume the speed
set prior to cancellation when you push the
"RESUME (ACCEL)" switch, providing the ve-
hicle speed is above 25 mph (40 km/h).

B660E01Y-AAT

To Reset at a Faster Speed

1. Push the  "RESUME (ACCEL)" switch and

hold it.

2. Accelerate to desired speed and release the

"RESUME (ACCEL)" switch. While the con-
trol switch is held, the vehicle will gradually
gain speed.

B660D01O

B660C03O-AAT

To cancel the cruise speed

To disengage the cruise control system, push
the "CANCEL" switch.
Additionally, the following actions will disengage
the system:

o Depress the brake pedal.
o Shift the selector lever to "N" position.
o Decrease the vehicle speed lower than the

memory speed by 12 mph (20 km/h).

o Decrease the vehicle speed to less than 25

mph (40 km/h).

o Release the cruise control ON/OFF switch.

B660C01O

Summary of Contents for 2006 Santa Fe


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands