Figure 13. Impact Detected Icon
To clear messages and reset truck to normal operation, an
Impact Reset must be performed by either a service techni-
cian or supervisor. See
User Interface - Supervisor
2200
SRM 1335 or
User Interface - Service Technician
2200
SRM 1336 for procedures.
Inspection Before Operation
WARNING
Report damage or faulty operation immediately. Do not
operate a damaged or defective lift truck. A lift truck
will only do its job when it is in proper working order. If
repairs are required, install a tag in the operator's area
stating DO NOT OPERATE and remove the key from
the key switch.
See
Checks and Inspection Procedures
in the
Mainte-
nance Section
of this manual for detailed instructions. Also
refer to
for operation and description of controls.
Checks With the Key or Keyless Switch
OFF
Inspect the lift truck before use and every eight hours or
daily as described in the
Maintenance
section of this
Operating Manual
.
Before using the lift truck, make the following checks:
•
Oil level in the hydraulic tank.
•
Electrolyte level and specific gravity of the battery.
•
Battery weight is within the range of battery weights on
the Nameplate.
•
Correct spacers are installed to limit horizontal battery
movement.
Operating Procedures
83
Property of American Airlines
