Table 1. Operator Controls (See Figure 8 and Figure 9) (Continued)
Item No.
Item
Function
7
Tilt Control Lever
NOTE:
Manual hydraulic control levers are standard on the trucks
covered in this manual. Electronic hydraulic mini-levers are available
as an optional control feature for the hydraulic functions. To enable
the operation of the hydraulic functions, the operator must be on the
seat and the seat belt should be fastened.
NOTE:
For lift trucks equipped with optional operator presence sys-
tem, the operator must be on the seat and the seat belt must be fas-
tened.
The tilt control lever can be either the second manual lever or second
mini-lever to the right of the operator's seat. Push the lever forward
to tilt the mast and forks forward. Pull the lever backward toward
operator to tilt the mast and forks backward.
On the standard lift truck, the manual lever or mini-lever has the label
shown at top left.
These trucks can be equipped with the Return to Set Tilt (RTST)
option. For lift trucks manufactured before November, 2014 the
RTST option is only on lift trucks with e-hydraulic mini-levers. For lift
trucks manufactured after November, 2014 the RTST option can be
on lift trucks with both e-hydraulic mini-levers and manual levers.
Model Description
31
Property of American Airlines
