Table 1. Operator Controls (See Figure 8 and Figure 9) (Continued)
Item No.
Item
Function
6
Lift/Lower Control Lever
NOTE:
Manual hydraulic control levers are standard on the trucks
covered in this manual. Electronic hydraulic mini-levers are available
as an optional control feature for the hydraulic functions. To enable
the operation of the hydraulic functions, the operator must be on the
seat and the seat belt should be fastened.
NOTE:
For lift trucks equipped with optional operator presence sys-
tem, the operator must be on the seat and the seat belt must be fas-
tened.
The lift/lower control lever can be either the first manual lever or first
mini-lever to the right of the operator's seat. Pull backward toward
operator to raise the carriage and forks. Push forward to lower the
carriage and forks.
For lift trucks equipped with Mast Height Limiter Switch, when mast
is raised >500 mm (1.6 ft) the truck speed will slow to 3 km/h
(1.8 mph).
If the lift/lower control lever has the label shown at top left, the lift
truck is equipped with a MONOTROL® pedal.
If the lift/lower control lever has the label shown at bottom left, the lift
truck is equipped with a standard accelerator pedal.
Model Description
30
Property of American Airlines
