time to prevent damage to system components on the lift
truck.
In the event of an emergency, the emergency disconnect
switch may be used to cut off power and automatically
apply the park brake. To test that this switch is working
properly, turn the key or keyless switch to the
ON
position.
The operator can disconnect all electrical power to the lift
truck by pushing the emergency disconnect switch in until it
clicks. To reset (re-connect) the emergency disconnect
switch and energize the electrical circuits, the operator
must turn the switch clockwise until it pops up. See
.
A.
MANUAL HYDRAULIC LEVERS
B.
E-HYDRAULIC MINI-LEVERS
Figure 41. Emergency Disconnect Switch
Steering System
The steering system should operate when a properly
charged battery is connected, an operator is present in the
seat, and the key or keyless switch is in the
ON
position.
Move the steering tire and wheel assembly completely to
the left by turning the steering wheel. The assembly should
turn smoothly to its stop. The steering tire should stop
approximately parallel to the battery. Turn the steering tire
Maintenance
187
Property of American Airlines
