b.
For lift trucks with automatic parking brake, press the
service brake pedal.
5.
Select the direction of travel using the MONOTROL®
pedal or the optional direction control switch. See
,
, and
6.
Push the MONOTROL® or accelerator pedal for acceler-
ation.
If Step 5 is done before Step 1 through Step 4 and the lift
truck moves, the SRO function is not operating correctly.
The lift truck must not be operated if the SRO circuit does
not function correctly. If the SRO circuit does not operate
correctly, have the Master Controller checked by author-
ized service technician.
For lift trucks equipped with the Optional Operator Pres-
ence System (OPS), follow this starting procedure:
1.
Make sure a charged battery of the correct voltage is
installed and connected.
2.
Sit on the seat to close seat switch. Fasten seat belt to
close belt switch. Check to ensure all operator controls,
traction and hydraulic, are in neutral position. If a control is
not in the neutral position, it must be returned to neutral
position before starting the lift truck.
3.
Turn the key or keyless switch to the
ON
position.
4.
Perform one of the following actions:
a.
For lift trucks with manual parking brake, release the
parking brake; if the parking brake was
NOT
set, recycle
brake.
b.
For lift trucks with automatic parking brake, press the
service brake pedal.
5.
Select the direction of travel using the MONOTROL®
pedal or the optional direction control switch. See
,
, and
6.
Push the MONOTROL® or accelerator pedal for acceler-
ation.
Operating Procedures
91
Property of American Airlines