E-Hydraulic Main Control Valve
To use the emergency load lowering valve, follow these
steps:
1.
Remove floor mat and floor plate.
2.
Press the emergency load lowering valve in and rotate it
1/4 turn in any direction, then release by removing finger
from valve. See
.
3.
To disengage the emergency load lowering valve, press
back in and rotate 1/4 turn in any direction. When disen-
gaged, the red plunger will extend slightly further out of the
body of the valve.
4.
Install floor plate and floor mat.
Operating Procedures
129
Property of American Airlines
