YOUR SPASIDE CONTROL
LIGHT
AUX
COOL/DOWN
LIGHT
INDICATOR
JET 1
WARM/UP
HEATER
INDICATOR
JET 2
Blower / AUX Key: Press this key to turn the blower ON and OFF. An
automatic timer will turn the blower off after 15 minutes of operation.
Light Key: Press this key to turn the light ON and OFF. An automatic timer
will turn the light off after 4 hours of operation. The Light indicator will
illuminate when it is active.
Jets 2 Key: Press this key to turn Pump 2 ON and OFF. An automatic timer
will turn the pump off after 15 minutes of operation. Jet 2 indicator will
illuminate when it is active.
Jets 1 Key: Pressing this key when the pump is OFF will turn it ON to Low
Speed, a second press switches the pump to High speed, a third press turns
the pump OFF. If the pump is ON from manual activation, an automatic timer
will turn the pump OFF after 15 minutes of operation. Jet 1 indicator will
illuminate when it is active. If the pump cannot be turned OFF a filter cycle is
active.
JET 1
INDICATOR
JET 2
INDICATOR
Temperature Set Keys: Press the “Cool/Down” button or “Warm/Up”
button to display the current set water temperature. Pressing either
button while the set temperature is displayed will increase or decrease
the set temperature by 1°F. The temperature is adjustable between 80°F
- 104°F / 26°C - 40°C or 50°F - 99°F / 10°C - 37°C (See Temp Range
Settings Pg.8)
26
Overlay and spaside may vary
