HydroQuip 8800 BP Series, Installation & Operation Manual

Page: 12 / 52

10
208V ELECTRICAL CONNECTIONS CONSIDERATIONS
Heater main wires
electric heater models
only
GROUND
GROUND
GROUND
H L
C
L
C L
L
L
C
L
C
PUMP
1
PUMP
2
BLOWER
H L
C
OZONE
12V
LIGHT
L
C
PUMP
3
L
L
120V
LIGHT
FIREMANS
SWITCH
FUSE 30A
FUSE 30A
J35
MAIN MAIN
J34
J58 J53
J45 J79 J54 J77 J75 J78
J36 J12 J88 J62
J37 J4 J1 J47
J72 J42 J3 J61
J51 J52 J98
J56 J57 J55 J59
J41 J60
J49 J48
Ground Line 1 Line 2
GFCI BREAKER #1
(240v 4-Wire only)
Neutral Line 1 Line 2 Ground
see page 8 for breaker sizing
GFCI BREAKER #2
(240v 3-Wire only)
see page 8 for breaker sizing
Move dip switch #2 - #4 to the ON position
to allow high speed pump(s) and heater to
function simultaneously
Fig. A
Red Black
SwtichBank ON:
A2: Add 1 HS Pump with heat
A3: Add 2 HS pumps with heat
A4: Add 4 HS pumps with heat
IMPORTANT 208V INFORMATION
The system has the capability to operate on 208V provided certain changes are made
to the circuit board transformer and input wiring. When operating on 208V a compatible
pump must be used. A compatible pump would be either 120V or marked specically
for use with 208V.
**240V pumps provided by Hydro-Quip are NOT 208V compatible **
Below is an illustration of the system wiring as shipped from Hydro-Quip. Follow the
instructions on page #X and the illustration on page #X to make the system compatible
with 208V incoming power.