HQ Set Up
Set Up #
Pump 1
Pump 2
Pump 3
Blower
Default
18
2-Speed
1-Speed
None
1-Speed
Opt 1
3
2-Speed
2-Speed
None
1-Speed
Opt 2
2
2-Speed
2-Speed
1-Speed
None
Opt 3*
5
2-Speed
1-Speed
1-Speed
1-Speed
SYSTEM CONFIGURATION (Optional)
Set Up Reference Table
You will have 1 minute to complete the setup change after you manually exit Priming Mode.
Immediately after exiting Priming Mode, press this sequence of buttons: Warm, Light, Warm, Warm, Warm, Warm.
Continue to press Warm until the diplay shows the Setup Number (S-01, S-02, etc.) you want to switch to.
using the newly-selected Setup from that point on.
Move DIP Switch 1 to the OFF position to take the spa out of Test Mode. °F or °C will replace °T.
NOTE: Changing the Setup may require wiring changes as well - refer to the wiring diagram.
When the correct setup number is showing, press Light once, and the system will reset,
Changing Software Setups
While the system is running, move DIP Switch 1 (on S1 on the Main circuit board) to ON.
Under the TEST Menu, the Setup screen will allow changing the Setup from 1 to any number established by the
Manufacturer.
When the panel displays RUN PMPS PURG AIR, press any Temperature button ONCE to exit Priming Mode.
You should see “---T” where the T indicates the system is in Test Mode.
SET
SET
The System will reset and go into Priming Mode if the Light Button
is pressed while anything other than the current setup is flashing.
If there is no change to the Setup Number (S-01, S-02, etc.),
the display returns to the SETP screen.
Several Setups can
exist in in this string
A dash (--) indicates
SET
SET
SET
SET
SET
SET
SET
While the Set Temperature is
still flashing, press Light
TEST will now appear in
the LCD first.
SET
RANGE
Main Screen
READY RANGE FLTR1
Main Screen
READY
RANGE FLTR1
SET
SET
SET
SET
SET
When set to ON, Panel will display
alternate readings from
Senor A and Sensor B
on Main Screen
Displays Fault Log
Approx.
5 sec.
or
Approx.
5 sec.
or
the current Setup.
Y Splitter Req.
No
No
No
Yes
*See page 23 for Option 3 considerations.
24
