HydroQuip 8800 BP Series, Installation & Operation Manual, Page: 35 / 52

Adjusting the Set Temperature
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to
ash. Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops ashing, the spa will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to ash. Pressing the button
again will cause the temperature to change in one direction (e.g. UP). After allowing the display to stop ashing, pressing
the Temperature Button will cause the temperature to ash and the next press will change the temperature in the opposite
direction (e.g. DOWN).
Press-and-Hold
If a Temperature button is pressed and held when the temperature is ashing, the temperature will continue to change
until the button is released. If only one temperature button is available and the limit of the Temperature Range is reached
when the button is being held, the progression will reverse direction.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated in
the display by an “up” arrow, and the Low Range designated in the display by a “down” arrow.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a “vacation” setting.
The Ranges are chosen using the menu structure below. Each range maintains its own set temperature as programmed by
the user. This way, when a range is chosen, the spa will heat to the set temperature associated with that range.
For example:
High Range might be set between 80°F and 104°F.
Low Range might be set between 50°F and 99°F.
Freeze Protection is active in either range.
See Mode Setting on Page 29
for additional heating control information.
Press a Temp Button repeatedly to change the temperature.
Low-Range Temp Choice
Pressing and holding a Temp Button will also change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Toggle the Range arrows in the LCD.
SET SET
Set Temp will Show & Flash
Set Temp will Show & Flash
SET SET SET
SET
SET
Waiting
Several Seconds
Reverts to Original Setting
To Set
*****
SET
While
temperature
is ashing...
To next item in Main Menu
Main Screen
READY RANGE FLTR1
Main Screen
READY
Several Seconds
OR
Main Screen
READY RANGE FLTR1
Press a Temp Button repeatedly to change the temperature.
Several Seconds
OR
Main Screen
READY
Main Screen
READY
RANGE RANGE RANGE
RANGE FLTR1 RANGE RANGE
RANGE FLTR1 RANGE FLTR1 RANGE FLTR1 RANGE FLTR1 RANGE FLTR1
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel conguration
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
*****
ignores any change to that menu item.
High-Range vs
TEMPERATURE SETTINGS
30